Home > Products > High Pressure Homogenizer

NanoGenizer-Quad (Quad Pump)

Description: Laboratory Quad-Pump testing up to 30,000 psi with electric power.
Catalog Number: NanoGenizer-Quad
    Please select the information you wantX
  • Pressure:
    15,000psi 20,000psi 25,000psi 30,000psi
  • Syringe Inlet&Outlet:
    50mL*2 100mL*2 200mL*2
  • Option: Inlet Stainless Cylinder:
    None 500mL 1000mL 2000mL 300mL-Glass-Jacketed
  • Option: Heat Exchanger:
    None HPE-100 HPE-150 HPE-150-3D
  • Voltage:
    220V
  • Warranty:
    Standard 1 year 2 year 3 year 4 year 5 year
  • IQ/OQ Installation and Operational Qualification:
    N/A IQ/OQ
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
+
-
Units
  • Description
  • How to Use
  • FAQs and Tips
  • How to Order
Description:
Laboratory Quad-Pump up to 30,000 psi with concept testing of parallel and series flow direction.
 
Application:
Nanodispersions, nanoemulsions and nanotube
Cell disruption
Micro/nanoencapsulation in polymers, liposomes and oils
Solid dispersion and suspension, deagglomeration
 
Performance:
Energy efficient, 1/2 energy loss of the most homogenizers
Small (integrated design delivers the light weight and small dimensions)
Smart (programming control systems confer diligent functions: auto stop with time/volume)
Silent (noiseless performance)
Strong (6-27L/hr)
CE compliant and RoHs compliant
 
Specification
Catalog No. NanoGenizer-Quad
Flow Rate 6-27L/hr
Min. Sample 5mL
Max. Pressure 30,000psi
Dimensions(cm) 92 × 69 × 40
Weight 117 kg (258 lbs)
Max. Temp. 80ºC (176ºF)
Power 220V
Cleaning Flush to clean
Application Nano emulsion, fat emulsion, liposome, cell disruption, nano dispersion, deagglomeration
Features Digital display of pressure or pressure gauge
 
Standard Features
Parts Y-type diamond interaction chamber with cooling option
Control System High pressure programming control systems®: touch screen, speed control, auto stop control by volume, time, pressure or temperature, display of flow rate and time, overload protection
Pressure Gauge Digital display on the touch screen
Inlet Type Tri-clamp
Outlet Type Tri-clamp
Inlet Reservoir 500mL S/S cylinder
Outlet Reservoir Plastic hose
Product Material 316L stainless steel, tungsten carbide, viton, teflon
Material Standard Sanitary grade, FDA, GMP
Warranty 1 year against any manufacturing defects
 
Option Features
Parts High pressure extruders, homogenizing valves two stages, heat exchanger
Control System Mechanical control: speed, start, stop controls
Detector Pressure gauge, pressure transducer up to 8 optional, temperature transducer up to 8 optional
Outlet Type Tri-clamp or luer
Inlet Reservoir 10mL, 20mL, 50mL, 100mL, 200mL syringe, S/S cylinder, jacketed glass cylinder or online
Outlet Reservoir 10mL, 20mL, 50mL, 100mL, 200mL, syringe, S/S cylinder, jacketed glass cylinder or online
Cylinder Titanium high pressure cylinder (resistant to strong acid and base)
 

Varieties of Inlet and Outlet for NanoGenizer-Quad
Inlet:  syringe; open container; stainless steel cylinder
Outlet: syringe; open container; stainless steel cylinder

Varieties of Inlet and Outlet for NanoGenizer-Quad
Disassemble the seal
Disassemble the seal

Assemble the seal
Assemble the seal
Troubleshooting:
Our design has minimized the occurrence of  air-blocking, chamber-blocking and overload.
However, the improper operation of the homogenizer can still induce errors and cause damage to the homogenizer.

Air Blocking
Symptom: there is no pressure and no sucking from inlet
Prevention: do not run with empty inlet
Reason: there is air inside the pump
Solutions:
1) In the customer setup, push the button called Degas
2) Running 50mL water with 50% speed
3) Push the ball into the inlet valve with a pin
Push the ball into the inlet valve with a pin

Chamber Blocking
Symptom: overload of the pressure
Prevention: pre-treat the sample carefully; reduce the speed
Reason: there are aggregates or particles in the sample; too high a speed
Solutions:
1) Reverse flow the outlet valve with 100mL water with low speed
2) Reverse flow the chamber with water from low to high speed

Overload
Solutions:
1) Reduce the speed and close the power, wait 30 sec and restart 
2) Wash with water or solvent
3) Run with clean and homo-disperse sample


No Response
Symptom: the equipment does not respond when click the “Start” button on the touch screen
Solutions: 
1)Turn off the power supply and wait for 30 sec to restart
2) If there is still no response, please check the power input. The power supply of the equipment is 220V. When the external power supply is 110V, a power converter shall be used. And its INPUT port should connect to 110V while the OUTPUT port connect to 220V

Air blocking rarely causes damage to the NanoGenizer; however, the chamber blocking is harmful to the pump because of overloaded pressure in an instant.
1) Pretreat the sample carefully, and always use a clean and homo-disperse sample
2) Adjust the pressure from low to high
3) For safety, do not point the inlet or outlet of high pressure devices and equipment supplied by Genizer, including high pressure homogenizer, extruder, interaction chamber and valve, to any personnel or object that may affect safety or induce property loss.

Tips:
For facilitating the user applications, the two ports in the high pressure cylinder of the NanoGenizer are exchangeable for inlet and outlet.
 

Pressure and chamber selection for various applications with NanoGenizer
 
Cells Mammalian cell
Mammalian cell
Insect cellInsect cell Bacteria cellBacteria cell Yeast cellYeast cell Algae cellAlgae cell Spore
Ganoderma
Sample CHO|Hela Sf9|Sf21|H5 E. Coli   Yeast Green algaea Ganoderma
Pressure 600-800bar   8500-11500psi 600-1000bar 8500-14500psi 800-1000bar 11500-14500psi 1200-1400bar 17500-20000psi 1200-1500bar 7500-21500psi 1300-1600bar 18500-23000psi
Chamber F20Y, F20Y-RT F20Y, F20Y-RT F20Y, F20Y-RT F20Y, F12Y F20Y, F12Y F20Y, F12Y












 
Emulsions Oil in water emulsions
Fat emulsion
Water in oil emulsionsCosmetics Oil emulsionFuel FoodMilk Liposome (o/w)Liposome (o/w) Liposome (w/o)
DNA|lipopolyplex
Sample Fat emulsion Cosmetics Fuel Milk DOX DNA|lipopolyplex
Pressure ~20,000psi ~10,000psi ~20,000psi ~10,000psi ~20,000psi ~8,000psi
Chamber F20Y, F12Y F20Y F20Y, F12Y F20Y F20Y, F12Y F20Y
















 
Dispersions Pigments
Inks, Coatings
CreamsCreams BatteryLithium/Solar cell Particle aggregationNano fibril GrapheneGraphene Nanotubes
Carbon Nanotubes
Sample Inks, Coatings Creams Lithium/Solar cell Nano fibril Graphene Carbon Nanotubes
Pressure ~25,000psi ~20,000psi ~20,000psi ~25,000psi ~20,000psi ~20,000psi
Chamber F20Y, F12Y F20Y, F12Y F20Y, F12Y F20Y, F12Y F20Y, F12Y F20Y, F12Y
1. Order the unit from your local agent (recommended)

2. Add the item to the cart, get an online quote from our website and confirm the order and payment accordingly (recommended and quick)
Get Quote and Order it Offline

3. Email us to get a quote

4. Order and pay online from the website if the total amount exceeds $3,000.00.